loadingtrax.netlify.com

1. USBee AX Pro Mixed Signal Oscilloscope, Logic Analyzer and More The USBee AX Test Pod is a HUGE sample buffer PC and USB based programmable multifunction digital storage oscilloscope, logic analyzer and digital signal generator in a single compact and easy to use device.
2. USB Universal Serial Bus - CWAV - USBee AX-Pro Drivers Download. Device types / USB Universal Serial Bus / CWAV / USBee AX-Pro. 2008-12-02: Version.

Jun 27, 2018 USBEE AX PRO DRIVERS FOR WINDOWS - Hi mates, how is all, and what you would like to say about this article, in my view its truly amazing for me. This product is pretty clearly a clone product. C firmware High speed: I added 68k resistor in series and I can calibrate the device and have right measurement on analog channel.

The HT USBee-AxPro is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (3MHz analog bandwidth).

It is able to switch between USBee AX-Pro, Salea Logic and Altera USB blaster mode via a button. When pressing the button the USB VID/PID changes.

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

See HT USBee-AxPro/Info for some more details (such as lsusb -v output) on the device.

• 1Hardware

Hardware

HT2013 V5.00:

• Main chip: Cypress CY7C68013A-56SSOP (FX2LP)
• 64Kbit I²C EEPROM: Microchip 24LC641
• 2Kbit I²C EEPROM: Microchip 24LC02B
• Auxiliary 8051 chip: ST STM8S003F3 (used for handling the button)
• Supply voltage regulator: Advanced Monolithic Systems AMS1117-3.3
• Analog-to-digital converter: Texas Instruments TLC5510I
• Analog input amplifiers: Analog Devices AD8065 (SMD marking 'HRA')
• Analog amplifiers negative supply: Intersil ICL7660 (7660 AIBAZ V120428A)
• Crystal: 24MHz

FX2LP pin mappings

Analog frontend

Usbee Ax Pro Driver Download Windows 7

Schematics:

Notes:

• Some devices have R2 = 66.5Ω (instead of 66.5kΩ), this basically limits the range to -3.3V — +3.3V.
• TLC5510 is used with ~3.3V 'reference' from LDO output which is both out of the allowed range and is a major source of inaccuracy.
• Some devices (probably those that do not have U5 populated) produce bogus min and max spikes when measuring certain voltages, this can probably be remedied by adding small (on the order of 10s pF) capacitance to U5 Vcc and GND pins or to the ADC CLK line.

HT_V6.0:

• ..

Pin mappings

The FX2 CTL2 and PD0.7 pins are mapped exactly like the HT2013 V5.00 version. The TLC5510I OE# pin is tied to GND.

Photos

HT2013 V5.00:

• Device package

• Case, front

• Device

• PCB, front

• PCB, front

• PCB, front

• PCB, back

• TLC5510I

• STM8 1

• STM8 2

• Probe adaptor

• FX2

• Expansion board

• AMS1117

• 7660

• 24LC64

• 24LC02B

• Version without signal generator

• Version without signal generator case

HT2013 V5.00 (no blue button PCB):

• Package contents

• Device, top

• Device, bottom

• Connector

• USB

• Analog connector, top

• Analog connector, bottom

• Button connector

• PCB, top

• PCB, bottom

• Cypress FX2

• ST STM8S003F3

• Microchip 24LC64I

• Microchip 24LC02BI

  Whilst extracting a highly compressed RAR file into a hard drive of low disk space the error “ The archive is either in unknown format or damaged ” might pop-up unexpectedly and leads to corruption of the RAR file. How to eliminate WinRAR file is either unknown format or damaged error? The answer to these questions is very simple, by making use of RAR repair tool. This utility successfully resolves all issue related to RAR file corruption. It use advance algorithms to perform scanning operation on damaged RAR file and fixes it. The File Is Unknown Format Or Damaged Roshal Archive files often called as RAR are files used to compress all kinds of files like songs, movies, video clips, documents and many more. The main advantage of using these files is that, it saves memory on hard disk and these RAR files can be easily transferred over the internet. Memperbaiki file rar yang unknown format or damaged version.

• Intersil ICL7660

• TI TLC5510I

• AMS1117-3.3

HT_V6.0:

• Package contents

• Device, top

• Device, bottom

• ConnectorAutocad lt 2016 serial number.

• USB

• Analog adapter, top

• Analog adapter, bottom

• PCB, top

• PCB, bottom

• Cypress FX2

• Microchip 24LC02B

• TI TLC5510I

• Intersil ICL7660S

• AMS1117-3.3

• HRA

• 24MHz crystal

Protocol

Turtle Beach

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources